Ebyte EA01-SG, Руководство пользователя

Страница: 24 / 28

C
hengdu Ebyte Electronic Technology Co., Ltd. EA01-SG UserManual
Copyright ©2012–2020
，C
hengdu Ebyte Electronic Technology Co., Ltd
23
CHAPTER ᴠ: POWER SUPPLY PROCESS AND DEEP SLEEP INSTRUCTIONS
First, The Serial Port Report "System Power On Mode: " Indicates The Module Mode.
<Mode>=0,Represents The Normal Power-Up Mode
；
<Mode>=1,Represents The Reset Pin Hardware Reset On The Power
；
<Mode>=2,Indicates That The Software Is Reset And Overpowered
；
<Mode>=3, Represents RTC Deep Sleep Wake Up
；
<Mode>=4,Represents The Serial Rx Pin Deep Sleep Wake Up Power
；
<Mode>=5,It Means That The Watchdog Returns To Power
；
Secondly, The Serial Report "TCPIP Is Ok" Indicates The Success Of The Network, And The TCP / UDP Link Is Ready.
Finally, The Serial Port Report "+ XSSTATE: , " Indicates Whether The Socket Of The TCP / UDP Is Successfully Connected.
<Id> Represents The Socket Id Created, Currently Supports Only 0 And 1, TCP / DUP Channels Can Only Use 0, COAP, MQTT,
Cloud Channels With 1.
<STATE> Socket Connection STATE, 1 Is Connected STATE And 0 Is Disconnected.
AT ORDER RESPONSE
ATD*98<NEWLINE> CONNECTING
OK
+++ OK

Up-power Works In at Instruction Mode By Default. In at Order Mode, ATD * 98 Or ATD * 99 Will Switch To Trans
transmission Mode.

In Transmission Mode, The Last Three Bytes Of User DATE Are "+ + +", Or The Three Bytes Of "+ + +" Are Sent
After The Completion Of The User DATE Transmission, Which Will End The Transmission Mode.
Finally, If You Need To Enter The Deep Sleep After The DATE Communication Ends, Then Enter The "+ + +"
Exit Transmission Mode To Enter The at Command Mode And Input The AT + WORKLOCK=0 Into The Deep
Sleep.The Next Time The DATE Needs To Be Sent, Input at Instruction To Wake Up The Module From Deep
Sleep. After The Power-Up Process, Call AT + SOCKONOFF Instruction To Open The Socket0