Ebyte E70-915NW14S, Руководство пользователя

Страница: 18 / 25

Chengdu Ebyte Electronic Technology Co.,Ltd E70-915NW14S User Manual
Copyright ©2012–2019 ，
Chengdu Ebyte Electronic Technology Co.,Ltd
17
1
“ +++” enter AT Command
+++
Parameter specification:
Null
Response:
Enter AT Mode
Example ： +++
Note: 1. The AT command can be used only after entering the AT command mode
2. After entering the AT command mode, the AT command mode can be used again only after exiting the AT
command mode, reset or restart the module
3. When writing this command, the serial debugging assistant must be set not to send new lines; writing other AT
commands must be set to send new lines.
2
AT+EXIT Exit AT command mode
AT+EXIT
Parameter specification:
Null
Response
：
Exit AT Mode
Example
：
AT+EXIT
Note: AT commands are invalid after exiting AT command mode
3
AT+CNCFG Set / Query device channel
AT+CNCFG=?
Parameter specification:
Query the current working channel
Response
：
Channel ： 0
AT+CNCFG=Value
Parameter specification:
Value
： 0~63 （ Factory default parameter is 0 ）
Note: 1. In the long-distance mode and standard transmission mode, the frequency range is (908.2MHz ~ 920.8MHz), the
channel interval is 0.2MHz, and Fre = 908.2 + (Channel * 0.2);
In high-rate mode, the frequency range is 902.4MHz ~ 927.6MHz, the channel interval is 0.4MHz, and Fre = 902.4
+ (Channel * 0.4);
2. After setting the channel, the network information will be cleared
4
AT+ WMCFG Set / Query the device's working mode configuration (restart to take effect)
AT+ WMCFG =?
Parameter specification:
Query the current working mode
Response
：
WMCFG
：
4
AT+ WMCFG =Value
Parameter specification:
Value
：
0~4
0
，
Coordinator ；
1, Normal node;
2, Dormant Node ；
3, Sleep mode ；
4, Pin control (factory default)
Example
：
AT+ WMCFG =4
Note: 1. After setting a new mode, it needs to be reset or power off and restart
2. After setting the mode, the network information will be cleared
5
AT+DINFO Device information acquisition
AT+DINFO=SELFS
Parameter specification:
Acquire its own short address and return it through the serial
port.