Chengdu Ebyte Electronic Technology Co.,Ltd
E70-915NW30S User Manual
Copyright ©2012–2019
，
Chengdu Ebyte Electronic Technology Co.,Ltd
1-17
shown in Figure 3:
Figure 3
Normal node configuration
Open the serial port assistant and select the serial port corresponding to the device. Set the baud rate to 115200, the
data bit to 8 bits, the parity bit to none, the stop bit to 1 bit, and the flow control is disabled, open the serial port.
Enter "+++" without line breaks to enter the AT command mode. When receiving “Enter AT Mode", the AT mode is
successfully entered.
Enter "AT+HELP" with line breaks to see all instructions. As shown in Figure 4:
Figure 4
Then enter "AT+WMCFG=1" with line breaks to configure the device as the coordinator mode, as shown in Figure
5:
Figure 5
Then enter “AT+RSTART” to restart the device with a line break. The coordinator configuration is complete.
As shown in Figure 5-6:
