Wireless UART Module User Manual of E64 Series Modules
Copyright ©2012–2017, Chengdu Ebyte Electronic Technology Co., Ltd.
12
/
16
11：8N1（equal to 00）
-----------------------------------------------
5，4，3 TTL UART baud rate（bps）
000：1200
001：2400
010：4800
011：9600（Default）
100：19200
101：38400
110：57600
111：115200
-----------------------------------------------
2，1，0 Air date rate（bps）
000：Reserved
001：2kb
010：5k
011：8k（Default）
100：Reserved
101：Reserved
110：20k
111：Reserved
-------------------------------------------------------
l
UART baud rate can be different between
communication parties
l
The UART baud rate has nothing to do with
wireless transmission parameters & won’t
affect the wireless transmit / receive features.
-----------------------------------------------------
l
The lower the air date rate, the longer the
transmitting distance, better anti-interference
performance and longer transmitting time.
l
The air date rate must keep the same for both
communication parties.
4
CHAN
7，6，5 Network group number 00-07H
000：Team 0
001：Team 1（default）
010：Team 2
011：Team 3
100：Team 4
101：Team 5
110：Team 6
111：Team 7
-----------------------------------------------
4，3，2，1，0 Slave address 00-1EH
（the default 0）
7 Reserved
-----------------------------------------------
6 IO drive mode (the default 1)
1：TXD and AUX push-pull outputs,
RXD pull-up inputs
0：TXD、AUX open-collector outputs,
RXD open-collector inputs
-------------------------------------------------
5，4，3 wireless wake-up time
（for the receiver, it means the monitor interval
time ,while for the transmitter it means continuously
sending preamble code time.）
000：0ms
001：250ms
010：500ms
011：750ms
100：1000ms(default)
101：1250ms
110：1500ms
111：2000ms
l
The network with same number cannot exist in
the same region.
l
Communication is not available for the devices
with different network.
l
Only one master exists in the network.
--------------------------------------------------------
l
31 salves
l
The number cannot be repeated for salve in one
network.
l
those parameters are invalid for the master
-------------------------------------------------------
l
This bit is used to the module internal pull-up
resistor. It also increases the level’s
adaptability in case of open drain. But in some
cases, it may need external pull-up resistor.
--------------------------------------------------------
l
The wake-up time for master cannot be less
than the monitor interval time of slave,
otherwise, it may lead data loss.
l
The longer the wake-up time, the lower the
average receive current consumption.
l
The same WOR time for master and slave is
recommended when master needs to wake up
slave.
