Ebyte E220-400R30D, Руководство пользователя

Страница: 10 / 16

Chengdu Ebyte Electronic Technology Co.,Ltd. E220-400R30D User Manual
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
9
5.3 Broadcast address

For example: Set the address of module A as 0xFFFF or 0x0000, and the channel as 0x04;

When module is the transmitter (transparent transmission), all modules under channel 0x04 will receive the data, the
purpose of broadcast is realized..
5.4 Monitor address

For example: Set the address of module A as 0xFFFF or 0x0000, and the channel as 0x04;

When module A is the receiver, it can receive the data sent from all modules under channel 0x04, the purpose of monitor is
realized.
5.5 STB details

STB is used for wireless sending &receiving buffer instructions and power-on configuration instructions.

STB indicates whether the module with data that has not been transmitted by wireless, or whether the received
wireless data that has not been totally transmitted through the serial port, or whether the module is powered up
during the configuration process.
5.5.1 Instructions during configuration

The module is powered will be in configuration mode on automatically, at which stage STB is high until the
configuration mode is exited
5.5.2 Wireless transmit instruction

The wireless is in the send state and the sending light will light up.

The wireless is in the receive state and the receive light will be lit.
6 Operating mode
Mode Mode introduction Note
General mode Sending and receiving wireless datas
Wake-up mode WOR as the sender, used with E220 serial series modules