background image

Chengdu Ebyte Electronic Technology Co., Ltd.

E22-xxxT22S series product user manual

Copyright©2012–2024

, Chengdu Ebyte Electronic Technology Co., Ltd.

4

Disclaimer and Copyright Notice

The information in this document, including the URL address for reference, is subject to change without notice.

The document is provided "as is" without any guarantee responsibility, including any guarantee for marketability,

suitability for a specific purpose, or non-infringement, and any guarantee for any proposal, specification or sample

mentioned elsewhere. This document does not bear any responsibility, including the responsibility for infringement

of any patent rights caused by the use of the information in this document. This document does not grant any

license for the use of intellectual property rights in estoppel or other ways, whether express or implied.

The test data obtained in the article are all obtained by the Ebyte laboratory, and the actual results may vary

slightly.

We hereby declared that all brand names, trademarks and registered trademarks mentioned in this document

are the property of their respective owners.

The final interpretation right belongs to Chengdu Ebyte Electronic Technology Co., Ltd.

Notice :

Due to product version upgrades or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd.
reserves the right to modify the contents of this manual without any hint or notice. This manual is only used as a guide. Chengdu Ebyte
Electronic Technology Co., Ltd. makes every effort to provide accurate information in this manual. However, we does not guarantee
that the contents of the manual are completely free of errors. All statements, information and suggestions in this manual do not
constitute any express or implied guarantee.

Содержание E22 T22S Series

































Отзывы: