Chengdu Ebyte Electronic Technology Co., Ltd.
E180-Z5812SP Product Manual
Copyright ©2012–2019,
Chengdu Ebyte Electronic Technology Co., Ltd.
32
send
：
FE 05 37 FF
return
：
FB 37 Endpoint_info
send
：
FE 05 37 FF
return
：
FB 37 01 FE B0
05 04
Configuration command format
：
command format
command example
send
：
FD 05 37 Endpoint_info FF
return
：
FA 37
send
：
FD 05 37 01 FE B0
05 04 FF
return
：
FA 37
Endpoint_info
：
The length data format of 5 bytes is endpoint clusterId_H clusterId_L profileId_H profileId_L
Default parameters endpoint 0x01, clusterId 0xfeb0, profileId 0x0504
。
endpoint
clusterId
profileId
clusterId_H
clusterId_L
profileId_H
profileId_L
01
FE
B0
05
04
6.6.27 Configure the trust center connection key
Read instruction format:
command format
command example
send
：
FE 10 38 FF
return
：
FB 38 TrustCentLinkKey
send
：
FE 10 38 FF
return
：
FB 38
5A 69 67 42 65 65 41 6C
6C 69 61 6E 63 65 30 39
Configuration command format
：
command format
command example
send
：
FD 10 38 TrustCentLinkKey FF
return
：
FA 38
send
：
FD 10 38
5A 69 67 42 65 65 41 6C
6C 69 61 6E 63 65 30 39
FF
return
：
FA 38
TrustCentLinkKey
：
16 bytes in length, the default value is the default key of the ZigBee Alliance, and its value is
0x5A 0x69 0x67 0x42 0x65 0x65 0x41 0x6C
0x6C 0x69 0x61 0x6E 0x63 0x65 0x30 0x39
The device restarts to take effect.
Note: Only the network-connected device holds the same connection key (LinkKey) as the trust center (coordinator) to connect to the
network of the trust center (coordinator), and the trust center (coordinator) transmits the network key to the network-connected device ,
the network access device completes the process of joining the network to obtain the network key for normal communication.
