Copyright ©2012–2020
，成都亿佰特电子科技有限公司
4
Chapter III Basic operation
3.1 Fact sheet
A version of the relevant information is available: V3.0 - nrf_sniffer_V3_0.rar. Suitable for python 3.6 and above environment,
users can also choose to download the corresponding sniffer version from the official website to install according to their own
computer python environment. The structure of the data package is as follows:
Figure 3-1 Data package explanation
3.2 Firmware introduction
The default firmware from the factory is V3.0 version, and users can burn the firmware according to their own situation.
nRF_Sniffer Firmware is shown in the figure with the firmware name sniffer_pca10040_xxxxxx.hex.
Figure 3-2 Firmware kit
The user needs to open the shell to burn the firmware by himself, and the programming method is detailed in
section nRF_Sniffer_UG_v2.2 -2.2 The Install firmware with SEGGER J-Link
The programmed firmware interface is shown in the following figure:
