Chengdu Ebyte Electronic Technology Co.,Ltd.
E104-BT12NSP User Manual
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
12
3.
ADV Bearer: Broadcast forwarding connection.The two nodes can forward and forward broadcast messages
based on broadcasts, and can act as relay.Our product works on this connection.
4. GATT Bearer: Used for nodes that can participate in MESH networks without ADVbearer capabilities, sending
and receiving proxy PDUs over GATT connections via proxy protocol with other nodes.
The types of devices that our company supports are provision and mesh, lPN.
Provision node: A special Node node that initiates the entire network.Also called Gateway.It adds unstructured devices to
the Mesh network.The Provision node provides provision data to the unallocated device, including netkey, appkey, and
the unicast address corresponding to each of the devices' elements.
Mesh Node: Our Mesh node is a combination of four characters: Node, Relay Node, Friend Node and Proxy
Node.convenient and quick to use.
4.1.3.1 Moule
There are many models in SIG MESH. Our E104-BT10 module has three addresses. Each one can be bound to more
than one model. HSL's model has three addresses because it needs to control three things: brightness, saturation, and
color temperature.
Model name
Model ID
Master Address
Config Server
0000
Health Server
0002
Health Client
0003
Generic OnOff Server
1000
Generic OnOff Client
1001
Generic Level Server
1002
Generic Level Client
1003
Generic Default Transition Time Server
1004
Generic Default Transition Time Client
1005
Light Lightness Server
1300
Light Lightness Setup Server
1301
Light Lightness Client
1302
Light HSL Server
1307
Light HSL Setup Server
1308
Light HSL Hue Server
130A
Light HSL Saturation Server
130B
Light HSL Client
1309
VENDOR MODEL
（
pass-throug model ID
）
0001A8
Generic OnOff Server
1000
Master 1
Generic OnOff Client
1001
Generic Level Server
1002
Generic Level Client
1003
