Ebyte 4G-02E, Руководство пользователя

Страница: 22 / 33

Chengdu Ebyte Electronic Technology Co.,Ltd
E840-DTU(4G-02E) User Manual
Copyright ©2012–2019
，
Chengdu Ebyte Electronic Technology Co.,Ltd
22
EBTIOT set/inquire to enable Ebyte IoT Cloud Platform
CREG Inquire if it is registered to network
CSQ Inquire signal strength
CPIN Inquire SIM card status
POTOCOL set/inquire if protocol transmission mode starts
UARTEX
set/inquire serial port parameter(9600,8
，
N
，
1)
ICCID Inquire SIM card’s ICCID
HSPEED set/inquire if high speed continuous transmission is opened
LBS
set/inquire base station information
（
base station positioning
）
UARTTS set/inquire serial port packing length and gap
SMSSEND Send message
SMSINFO set/inquire message setting identifier
MODBUS set/inquire ModbusTCP/RTU switch function
MTCPID set/inquire ModbusTCP event identifier
NETHEAD set/inquire AT network head
MQTTMODE set/inquire MQTT mode
MQTT_ADDRESS set/inquire address and port of IOT
MQTT_CONNECT set/inquire parameter connected to IOT
MQTT_SUBSCRIBE_TOPIC set/inquire subscribed topic and level
MQTT_PUBLISH_TOPIC set/inquire published topic and level
MQTT_ALIAUTH set/inquire Ali cloud three factor
d) Command Description
：
AT+REBT
Function
：
Restart module
Format
：
configure
Transmit
：
AT+REBT<CR>
return
：
<CR><LF>+OK<CR><LF>
Parameter
：
None
Description
：
After the command is executed correctly, the module restarts immediately and enters the transparent
transmission mode after restarting.
AT+VER
Function
：
inquire firmware version
Format
：
configure
transmit AT+VER<CR><LF>
return <CR><LF>+OK=<ver><CR><LF>
Parameter
：
ver firmware version
Description
：
None
AT+INFO
Function
：
Inquire module type and version info.
Format
：
configure
transmit AT+INFO<CR><LF>
return <CR><LF>+OK=<mod_name>,<hw_ver>,<sw_ver><CR><LF>
Parameter
：
mod_name module name
hw_ver hardware version
sw_ver software version
Description
：
None
AT+EXAT
Function
：
exit command mode
，
enter transparent transmission mode