7
USER GUIDE
5.
6.
5.
SETTINGS MENU
To access and change the global default settings for the Retracer,
press and hold down
B
and press
A
to enter the [SETTINGS]
Menu.
Scroll to desired subject in the menu with the
LEVEL
control, then
press
B
to enter its sub menu.
In the same way, scroll through the sub menu using the
LEVEL
control, and use the
DELAY
knob to change value.
Press
SET
to save changes and then
ACTIVE
to exit the SETTINGS
MENU.
NOTE: Many of the settings in this menu can have individual values
attached to a specific preset. See bullet 10-12 for details on how to
attach individual values to a preset.
6.
PROGRAM (PRESET) LOAD/EDIT MENU
Press and hold down
A
to enter the program load/edit menu.
Use the two upper controls (
TONE
and
F.BACK
) to select
Bank
and
Program
entry. Then use
A
or
B
for desired operation (
Load,
Save, Erase, Copy, Move, Swap,
or
Label
). Execute or unfold selected
operation by pressing
TAP/SET
.
When
Label
operation is selected and unfolded:
a) Turn the
LEVEL
control to choose character.
b) Use
B
to move to the next character position.
c) If you want to rename the preset, erase the entire label by
holding
ACTIVE
for approx. 2s and write a new label.
d) Confirm the label and exit the menu by pressing
TAP/SET
.
When ready with your changes, press
ACTIVE
to exit the PROGRAM
LOAD/EDIT MENU.
NOTE: All factory presets are marked with a lock symbol and can
only be saved with changes as a new preset. You can lock/unlock any
of your own presets by turning the
DELAY
knob until a lock appear/
disappear on screen when in PROGRAM LOAD/EDIT MENU.
IMPORTANT!
Visit
www.ebssweden.com/content2/ebs-retracer-delay-workstation
and click on the “Register for updates”
tab to register for the Retracer email list to get instant news about firmware and software updates, tutorials
and other useful info related to your pedal. Make sure to have the latest firmware installed.
