USERS MANUAL
EBS REIDMAR 750
w w w . e b s s w e d e n . c o m
EBS REIDMAR
750 – REAR PANEL FEATURES
1
10
9
11
12
13
3
6
7
8
2
4
5
1. BALANCED OUTPUT
-A balanced output
functions as a high quality line box for
connecting to PA mixing consoles or to
studio or broadcast recording units, with
high noise immunity. The volume level does
not effect this output.
2. GND LIFT SWITCH
-Lifting ground is a great
aid in many occasions eliminating ground
noise and hum. When required, set this
switch to Lift position to disconnect the
ground from the balanced output.
3. PRE/POST EQ SWITCH
-The switch selects the
signal source. In the inner position this
switch selects the overall sound included
settings on the EQ, otherwise, in the lower
position an uncolored sound is taken
immediately after the amplifiers input.
4. LINE OUT
-This is a fullrange output that will
drive multiple poweramps, extending the
power of the system. The signal present at
this output is taken after the volume control.
5. REMOTES
– The EBS Reidmar 750 is
equipped with two remote jacks for
controlling with foot switches the character,
filter active switches, drive section, plus a
mute function. You may use any standard
footswitch pedal making connection to
ground for each of the remote functions.
Refer to the rear panel screen print and
technical specification for further info.
Note: Each of the filter switches on the front panel
needs to be set to inner position in order to be remotely
controlled.
6. SPEAKER OUTPUT
– Connect your speakers
here. Care should be taken when
connecting speakers so that the minium
total impedance is not lower than 4 ohms.
Warning: Lower impedance than 4 ohms may cause
permanent damage to the amp. EBS will not take
responsibility for eventual hearing damages caused by
the powerful EBS Reidmar 750.
