USERS MANUAL
EBS MULTIDRIVE - STUDIO EDITION
w w w . e b s s w e d e n . c o m
POWER OPTIONS
DC POWER ADAPTOR
For environmental reasons,
we recommend the use of a DC Power
Supply, such as the
EBS AD-9+
. The EBS
MultiDrive Studio Edition handles 9-12
V DC, and require a 2.1 mm pin center
negative type of connector.
BATTERY
This pedal can run on battery (not
included). To place a battery in the pedal
follow these steps.
1) Remove the four screws holding
the bottom plate.
2) Carefully remove the bottom plate.
3) Place a 9V alkaline type; 6LR61 in
the battery holder.
4) Gently place back the bottom plate.
Attach the four mounting screws using
moderate tension.