EBS LX20B, Инструкция по установке и программированию

Страница: 25 / 67

LX20B – Manual Page 25 / 67
7.1.1.2. Installer Code
Allows restricted access to the parameters of device. When istaller code is used
following groups of parameters are unavailable: Access, Transmission, Restrictions,
SMS notifications, RS232, Link control, and Phone line. An unauthorized attempt to
access to this parameters causes error notification.
Default restricted user’s service code: 2222.
7.1.1.3. SIM Card PIN
As a device operates via GSM network, SIM card is indispensable and it may be
received from phone operator. Before the first use PIN code of SIM card shall be
programmed for operation in given transmitter. PIN code is indispensable for
automatic system launching. In case of card without PIN number, it is possible to
enter any value e.g. 0000.
If you enter wrong PIN number after inserting card and switching on transmitter,
the system will not launch and you may be able to use card after entering PUK
number only (with use of any GSM mobile phone).
Factory setting of PIN in LX transmitter is
1111 .
7.1.1.4. Use backup SIM Card
NOTE! This option is only for the LX20B-5D model, which has two slots for
Nano SIM cards.
After selecting this option the following section shall appear:
7.1.1.4.1. SIM Card 2 PIN
In case of a device with two Nano SIM cards, the PIN for the second card must be
entered. In case of card without PIN number, it is possible to enter any value e.g.
0000.
If the PIN number is entered incorrectly, in case of failure SIM 1 card or SIM 2 card
backup test, the device will not switch to the second card, and you may be able to
use card after entering PUK number only (with use of any GSM mobile phone).
Factory setting of PIN in LX transmitter is
1111 .
7.1.1.4.2. Test inactive SIM Card every