EBS EBS 2600, Руководство пользователя

Страница: 21 / 184

21 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
the following table.
1
2
3
4
5
Fig. 7.
1i
1 Error; open collector, max. 45 mA.
2 Warning; open collector, max. 45 mA.
3 Printing; open collector, max. 45 mA.
4 +24 VDC (power supply).
5 GND (ground).
Fig. 7 shows a view of the connector from the outside of the printer.
Conveyor stoppage output
The printer offers an option of stopping the factory conveyor if an error that
makes printing impossible occurs. If the option is used, the factory conveyor is connected to out -
put 1j (see Fig. 8 ).
NOTE: Functional output!
The conveyor stoppage output does not serve a safety function. This is a functional output.
A description of 3‑pin female connector 1j (see Fig. 8 ) for stopping a factory conveyor is given in
the following table.
1
2
3
Fig. 8.
1j
1 NO ‑ Normally Open contact.
2 COM ‑ COMmon contact.
3 NC ‑ Normally Closed contact.
Fig. 8 shows a view of the connector from the outside of the printer.
The conveyor halt connector is provided with the following relay contacts:
– Normally Open ( NO - COM ), the contacts close when an alarm signal occurs,
– Normally Closed ( NC - COM ), the contacts open when an alarm signal occurs.
Current‑carrying capacity of the relay contacts:
‑ 0.5 A for 125 VAC ,
‑ 0.3 A for 110 VDC ,
‑ 2 A for 30 VDC .