USERS MANUAL
EBS DYNAVERB - STUDIO EDITION
w w w . e b s s w e d e n . c o m
w w w . e b s s w e d e n . c o m
THE CONTROLS
REVERB
sets the amount of the reverb
effect to be mixed in with the dry signal.
Note that when this control is in minimum
position, the Tone control has no effect.
In parallel effect mode (see advanced
options) this knob controls the volume of
the unit when engaged.
TONE
controls the high end timbre or treble
tone of the reverb effect signal. Use
this control to fine-tune your sound in
combination with the type switches. When
this knob is set to maximum, no filter is
engaged and a true fullrange reverb sound
is achieved.
TYPE SWITCHES
- These switches select which
type of reverb that is to be used. In total
there are eight (8) different reverb types
according to the program matrix shown.
LED INDICATOR
Indicates when the pedal in
switched on.
FOOT SWITCH
Switches the pedal on or off.
REVERB
TONE
