B
LOCK
D
IAGRAM
P
ANEL
C
ONTROLS AND
F
UNCTIONS
6 3
INPUT
- A low noise, high impedance
instrument input for all types of
instruments, active and passive.
___________________________________
CHARACTER
- The Session60 provides a
preshaping
filter,
character
, which operates
independently from the filter section. This
gives the user the opportunity to preshape
the sound before the final processing with
the filters.
When pressed to its inner position, a boost
is achieved in both the bass and treble
ranges, while the midrange is being slightly
cut.
__________________________________
GAIN
- Control to adjust the instruments'
signal strength to the right operating level in
the Session60.
For optimum basic signal level, turn up the
GAIN knob until the PEAK led starts
flashing from the strongest signal from the
instrument.
Note: A correctly set GAIN is vital for the
signal processing to work properly in the
Session60.
AUX IN
- The two RCA inputs gives you
the option of mixing in an external source
such as CD player or similar to the
Session60. Set the desired mix level with
the associated knob.
If you only have a mono source connect
to the input marked
mono
. Both channels
will only be monitored when using head-
phones.
__________________________________
VOLUME
- The VOLUME knob controls
all volume in the unit, controlling the
poweramp/speakers and headphones
output. The balanced output (XLR) is not
effected by the setting of this knob.
__________________________________
HEADPHONES
– Connect your favorite
headphones here. By connecting the head-
phones the speakers will automatically be
muted.
__________________________________
BALANCED OUTPUT
- Is a high
quality balanced output that functions as a
line box for connecting to PA mixing
consoles or to studio or broadcast
recording units.
Lifting ground is a great aid in many
occasions. When required, set the
Gnd Lift
switch to inner position to disconnect the
ground from the output.
__________________________________
POWER
– Powers the unit on or off.
