USERS MANUAL
EBS MULTICOMP - BLUE LABEL EDITION
w w w . e b s s w e d e n . c o m
w w w . e b s s w e d e n . c o m
THE CONTROLS
Set to ACTIVE position if you are playing an
active instrument or connected to an effects
loop. If not, set this switch to PASSIVE.
IT IS VERY IMPORTANT THAT THIS SWITCH IS SET
CORRECTLY FOR PROPERLY FUNCTION.
SENS.
controls the sensitivity of the
compression. The higher the setting, the
higher the sensitivity (reversed threshold). A
center click indicates the factory setting with
former MultiComp versions.
COMP
controls the amount of compression,
the ratio. The range is from 1:1 (minimum)
to 5:1(maximum position).
GAIN
controls the output gain of the
compressor. Compensate the output level
with reference to bypass. You can also use
this control to boost your sound.
TUBESIM
Activates the tube simulator,
for extra harmonics and warmth to
your sound.
MULTIBAND (MB)
Selects the dual band
compression. In this mode the bass and
treble compressors work independently.
NORMAL
Selects a normal one-band
compressor action. Moderate setting
recommended.
ACTIVE/
PASSIVE
Switch
(next to
input jack)
SENS.
COMP
