AVA PRO - Assembly instructions for the CPX300W alarm control panel
16
/
23
3.7.1.
Login to the network
Depending on the module used, the device can transmit data in three ways:
wireless via GPRS thanks to the GSM module,
wireless via Wi-Fi thanks to the Wi-Fi module,
wire by connecting to the Ethernet network thanks to the Ethernet module.
When the module was mounted on the CPX300W board and the power supply was turned on, an
attempt will be made to log in to the GSM/Ethernet/Wi-Fi network.
Table 7. GSM network login indication.
LED indicator
Description
STATUS
(green)
CELL
(yellow)
Attempt to login to the GSM
network
flashes
lights steadily
Logged in correctly to the
GSM network
lights steadily
flashes
Table 8. Ethernet/Wi-Fi network login indication.
LED indicator
Description
STATUS
(green)
ETH / WiFi
(yellow)
Ethernet/Wi-Fi network login
attempt
flashes
lights steadily
Logged in correctly to the
Ethernet / Wi-Fi network
lights steadily
flashes
3.7.2.
GSM range
Yellow LEDs on the CPX300W board marked as P1, P2, P3 and P4 (Fig. 1, item 20) indicate the signal level
for the GSM module.
Steady light represents about 25%, flashing light about 12.5%. Thus, when 2 diodes have a steady light
and one is flashing, it means that the signal level fluctuates within the limit of 62.5%.
Table 9. GSM range level indication.
LED indicator
Description
P1
P2
P3
P4
GSM range around 50%
lights steadily
lights
steadily
no light
no light
GSM range around
62.5%
lights steadily
lights
steadily
flashes
no light
