EBRO ARMATUREN EP 501, Быстрый старт

Страница: 30 / 95

30
Start-Up
To stop X.TUNE , press the left or right selection key
STOP
.
Procedure:
Key Action Description
MENU
press for
approx. 3 s
Change from process level
setting level
/ Select X.TUNE
RUN
Hold down
as long as countdown
(5 ...) is running
During the automatic adjustment
messages are displayed indi-
cating the progress of the
X.TUNE
"TUNE #1... X.TUNE ready" .
Press any key Return to main menu (MAIN)
EXIT
press
Change from setting level
process level
Tab. 11: Automatic adjustment of X.TUNE
You have to exit the main menu by pressing the left selection
key
EXIT
before the modified data is saved in the memory
(EEPROM). During the save process the save symbol is
indicated on the display.
16.3 Start-up Type EP 501 C
To be able to operate the positioner as a process controller, perform
the following steps:
1. Setting up the position controller:
Description see „16.2.1 Specifying the standard settings“
2. Setting up the process controller:
→
Enter the P.CONTROL auxiliary function into the main menu
(MAIN) via the configuration menu ( ADD.FUNCTION ).
Key Action
MENU
press for approx. 3 s
/ Select ADD.FUNCTION
ENTER
press
/ Select P.CONTROL
ENTER
press
EXIT
press
The P.CONTROL function is now activated and entered in the
main menu (MAIN).
Tab. 12: Enter the P.CONTROL auxiliary function into the main menu
(MAIN)
english
Type EP 501