Operating instructions
R3G310-AP52-01
Translation of the original operating instructions
3. TECHNICAL DATA
3.1 Product drawing
All dimensions in mm.
1
Cable AWG18, 3 x crimped ferrules
2
Cable AWG22, 4 x crimped ferrules
3
Accessory part: Inlet ring 31050-2-4013 not included in scope of delivery, other inlet rings on request
4
Clearance for screw 8-10 mm; tightening torque 2.5±0.2 Nm; gluing the screws is recommended
5
Tapping hole ready for self-tapping M4 screw, max. clearance for screw 6 mm
6
Tapping hole ready for self-tapping M4 screw, max. clearance for screw 8 mm
Item no. 51260-5-9970 · ENU · Change 87016 · Approved 2017-10-27 · Page 4 / 11
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com