ebm-papst K3G710-PV05-01, Руководство по эксплуатации

Страница: 9 / 15

Operating instructions
K3G710-PV05-01
Translation of the original operating instructions
→ If this is not possible, a drip edge can be produced by
fitting a cable tie directly in front of the cable gland for example.
4.4 Factory settings
Factory settings made for the device by ebm-papst.
Mode parameter set 1 PWM control
Mode parameter set 2 PWM control
Fan/device address 01
Max. PWM / % 100
Min. PWM / % 5
Save set value to
EEPROM Yes
Set value requirement Analog (linear)
Direction of action
parameter set 1 Positive (heating)
Direction of action
parameter set 2
Positive (heating)
Item no. 55799-5-9970 · ENU · Change 260717 · Approved 2022-06-23 · Page 9 / 15
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com