Operating instructions
K3G220-CD17-01
Translation of the original operating instructions
3.2 Nominal data
Motor
M3G055-CF
Phase
1~
Nominal voltage in VAC
230
Frequency in Hz
50/60
Type of data definition
ml
Speed in min
-1
2670
Power input in W
105
Current draw in A
0.78
Min. ambient
temperature in °C
-25
Max. ambient
temperature in °C
60
ml = max. load · me = max. efficiency · fa = running at free air
cs = customer specs · cu = customer unit
Subject to alterations
3.3 Technical description
Mass
1.8 kg
Size
220 mm
Surface of rotor
Thick layer passivated
Material of electronics
housing
Die-cast aluminium
Material of impeller
Plastic PA6, fibreglass-reinforced
Housing material
Plastic PA6, fibreglass-reinforced
Number of blades
11
Direction of rotation
Clockwise, seen on rotor
Type of protection
IP 44
Insulation class
"B"
Humidity class
F3-1
Mounting position
any
Condensate discharge
holes
Rotor-side
Operation mode
S1
Motor bearing
Ball bearing
Technical features
- Control input 0-10 VDC / PWM
- Output 10 VDC, max. 1.1 mA
- Tach output
- Motor current limit
- Soft start
Leakage current
<= 3.5 mA
Motor protection
Reverse polarity and locked-rotor
protection
Cable exit
Variable
Protection class
I (if protective earth is connected by
customer)
Product conforming
to standard
EN 60335-1; CE
For cyclic speed loads, note that the rotating parts of the device
are designed for maximum one million load cycles. If you have
specific questions, contact ebm-papst for support.
3.4 Mounting data
For depth of screw, see chapter 3.1 Graphic rendition of products
;
Secure the mounting screws against accidentally coming loose (e.g.
by using self-locking screws).
Strength class for
mounting screws
8.8
You can obtain additional mounting data from the product drawing if
necessary.
3.5 Transport and storage conditions
;
Use the device in accordance with its protection type.
Max. permissible
ambient motor temp.
(transp./ storage)
+ 80 °C
Min. permissible
ambient motor temp.
(transp./storage)
- 40 °C
3.6 Electromagnetic compatibility
EMC interference
immunity
Acc. to EN 61000-6-2 (industrial
environment)
EMC interference
emission
Acc. to EN 61000-6-3 (household
environment)
EMC harmonics
Acc. to EN 61000-3-2/3
Item no.: 50701-5-9970 · Revision: 74083 · Print-out: 2012-02-17 · Y. Uhlmann (VM-TDO) · Page 5 / 10
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 7938 81-0 · Fax +49 7938 81-110 · [email protected] · www.ebmpapst.com