Operating instructions
G2E140-AG02-78
Translation of the original operating instructions
3.2 Nominal data
Motor
M2E068-DF
Phase
1~
Nominal voltage / VAC
230
Frequency / Hz
50
Type of data definition
ml
Valid for approval /
standard
CE
Speed / min
-1
2000
Power input / W
200
Current draw / A
0.88
Motor capacitor / µF
4
Capacitor voltage / VDB
400
Capacitor standard
P2 (CE)
Min. back pressure / Pa
100
Min. ambient temperature
/ °C
-
Max. ambient
temperature
/ °C
50
Starting current / A
1.2
ml = Max. load · me = Max. efficiency · fa = Running at free air
cs = Customer specs · cu = Customer unit
Subject to alterations
3.3 Technical features
Mass
3.5 kg
Size
140 mm
Surface of rotor
Coated in black
Material of protective
cover
Sheet steel, thick-film-passivated
Material of impeller
Aluminium sheet, coated in black
Housing material
Die-cast aluminium, coated in black
Direction of rotation
Counter-clockwise, seen on rotor
Type of protection
IP 20
Insulation class
"F"
Humidity class
F0
Mounting position
Any
Condensate discharge
holes
None, open rotor
Operation mode
S1
Motor bearing
Ball bearing
Touch current acc.
IEC 60990 (measuring
network Fig. 4, TN
system)
< 0.75 mA
Electrical leads
Via terminals, capacitor connected via
terminals
Motor protection
Thermal overload protector (TOP) wired
internally
Protection class
I (if protective earth is connected by
customer at the connection point of the
housing)
Product conforming
to standard
EN 60335-1; CE
For cyclic speed loads, note that the rotating parts of the device
are designed for maximum one million load cycles. If you have
specific questions, contact ebm-papst for support.
3.4 Mounting data
For depth of screw, see chapter 3.1 Product drawing
;
Secure the mounting screws against accidentally coming loose (e.g.
by using self-locking screws).
Strength class for
mounting screws
8.8
You can obtain additional mounting data from the product drawing if
necessary.
3.5 Transport and storage conditions
;
Use the device in accordance with its protection type.
Max. permissible
ambient motor temp.
(transp./ storage)
+ 80 °C
Min. permissible
ambient motor temp.
(transp./storage)
- 40 °C
Item no. 13679-5-9970 · Revision 81525 · Release 2014-06-02 · Page 5 / 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com
