ZAG
GB
6
www.eberg.eu
STARTING THE DEVICE:
To start using the dehumidifier, firstly place it on a flat, stable surface , connect
the power plug to an appropriate socket. Then press the „ON / OFF” button on the front panel of the
dehumidifier, the LED will light up and the device will start working. The display will start showing the
current temperature and humidity value in cycles.
Pressing the „ON / OFF” button again will stop the machine.
The dehumidifier has an automatic shutdown function in the event of overfilling the water tank. In this
case, the display will show the red indicator of full tank „FULL” and the dryer will stop working
customer service or qualified personnel.
• If an application other than those described above is used, the device may not work properly or may
be damaged. The manufacturer and distributor are not liable for any damages caused by improper use
The device is designed to work indoors, in domestic conditions, in the temperature range from 5 ° C to
35 ° C.
The device should not be exposed to rainfall and not exposed to direct sunlight.
Do not use the device near heat sources or in dusty rooms.
Do not use the device in the area of flammable gases.
The dehumidifier should be placed on a flat, stable surface and ensure free air access to the ventilation
grids, keeping a distance of at least 20 cm from walls and other objects on the sides and 50 cm at the front,
back and top of the device.
ATTENTION!
Before starting the machine, make sure that the water tank is correctly installed and is not filled with water.
If the red „tank full” indicator is lit when the appliance is plugged in for the first time, pull the water tank
out a little and slide it back into position.
DEVICE INSTALLATION
STARTING THE DEVICE
CONTROL PANEL
Display
showing temperature, humidity and water tank full indicator
Time Setting button
Air Purifying button
ON/OFF button
