TIK
EN
7
www.eberg.eu
•
Do not attempt to repair or tamper with the device yourself. This voids the warranty and may put
the user at risk.
•
Install the device in a safe place to minimize the risk of accidentally tipping it over or tripping over
the power cord.
•
Do not cover or use the device near curtains, drapes, blankets, etc. Ensure free circulation of air
around the device.
•
Always keep the air inlet and outlet grilles clean and free of dust, hair and pet hair.
•
Before moving the device, turn it off using the ON/OFF switch then disconnect it from the power
source.
•
Use this device only as described in the manual.
Warning!
•
Do not cover!
•
Do not cover or restrict the air flow to the intake or exhaust grilles in any way.
II. BEFORE FIRST USE
•
Before first use, remove the device from the packaging and make sure that the device is complete
and undamaged.
•
After unpacking the device, check its condition. Do not use the device in poor technical condition.
You must report any damage found.
•
Keep packaging materials such as foils and staples out of the reach of children. Dispose of
the packaging components in accordance with local regulations and taking into account the
environmental impact.
•
It is recommended to leave the box for storage out of season.
•
Choose a suitable location for the device. Follow local safety regulations.
•
If the USB cable is damaged, it must be replaced by the manufacturer or a qualified service agent in
order to avoid a hazard.
•
Untangle (straighten) the cable before starting. Working with a coiled cord may cause overheating
and a risk of fire.
•
Do not connect the device to the mains until it is firmly positioned or attached with a clip.
•
Connect the plug to an appropriate wall socket with the parameters corresponding to the data on
the rating plate of the device.
