ROT
EN
20
21
4. MOUNTING ON FREE STANDING FEET
1.
Place the free standing feet on the ground, keep the slots of both feet inline, distance the foot at
least 12cm from the edge and offset the other foot by similar distance (at the opposite end). Insert
the panel into the slots.
2.
Screw the two bolts into the holes on the feet.
NOTE: Mounting feet are not included and should be purchased separately.
The wireless thermostat (remote control) contains a temperature sensor, in relation to which the regulation
takes place, and during the operation of the device it should be in the same room as the heating panel,
away from other heat sources, in a reference place for temperature measurement, height about 1.5m
above floor and a maximum distance of 8m from the operated device.
Day
AM/PM Connection status
Daylight Saving Time
DST status
Centigrade degree
Target Temperature
Fahrenheit degree
Battery low warning
Current temperature
(Wireless Thermostat)
Device status
ON - heating on
OFF - heating off
ATTENTION! Timer settings, operation and configuration of the device should be carried out via the
mobile application. The remote control does not support the timer function, it is mainly used to
turn on / off the heating device as well as to read and set the temperature.
5. WIRELESS THERMOSTAT (REMOTE CONTROL) FUNCTIONS AND SETTINGS
5.1. Layout of symbols on the display
