Q1
GB
7
www.eberg.eu
PLEASE READ THE SAFETY ADVICE CAREFULLY BEFORE USING THE APPLIANCE
• This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made
by children without supervision.
• Children of less than 3 years should be kept away unless continuously supervised.
• Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that
it has been placed or installed in its intended normal operating position and they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the
appliance or perform user maintenance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be
supplied through an external switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
• The heater must not be located immediately below a socket-outlet.
• Means for disconnection having a contact separation in all poles must be incorporated in the fixed
wiring in accordance with the wiring rules.
• The heater must be installed at least 1.8 m above the floor.
• Means for disconnection having a contact separation in all poles must be incorporated in the fixed
wiring in accordance with the wiring rules.
• Do not use this heater in the immediate surroundings of a bath,a shower or swimming pool.
CAUTION:
Some parts of this product can become very hot and cause burns. Particular attention has to
be given where children and vulnerable people are present.
Before using this appliance,always follow the safety advice during assembly, use and maintenance.
The fan heater must be installed on a wall before
operating. Don’t try to use it without installation.
The installation sequence of the fan heater is as
follows:
1. Find a space to install the fan heater (See Figure ).
2. Drill two holes of the dimension of the expansible
tubes ¢ - 8 mm - in the wall (See Figure ) - D=
394mm
3. Insert the expansible tubes into the holes and
tighten them with the screws provided firmly.
NOTE:
Fasten the screws tightly. Do not fasten the
screw into the expansible tube thoroughly; the
length of the bare parts should be 10 mm.
WARNING:
In order to avoid overheating, do not cover the heater.
SAFETY ADVICE
INSTALLATION
