23
Troubleshooting
GB
Failure Phenomenom
Possible Reasons and Solutions
Failure to start the device
1. Check the correct power supply.
Little volume of air from air
outlet
1. Packaging bag of filter is unpacked.
Remove the packaging bag and install filter again.
2. Air inlet or outlet is blocked by foreign matters.
Remove them.
3. Filter is dirty. Clean or replace it.
Not apparent dust removal
and purifying effect Not
obvious improvement of
air quality
1. Filter is not installed on the device. Install the filter.
2. Window or door is frequently opened. room with
slow air flow, because the outside dirty air comes in,
it takes a longer time to purify the indoor air.
3. The device is located in a place with difficult access
to air. Locate the device in a place with free access
to air.
4. The filter is filthy, and thus affects purifying effect.
Clean or replace it.
Peculiar Smell from the
air outlet
1. The filter is quite filthy. Change for a new filter.
Frequently Asked Questions
Notice: If one is unable to remove faults through the above instructions, please contact the
customer service centre. Please do not repair it on one’s own to avoid dangers and
possible damage to the device.
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. They
can take this product for environmental safe recycling.