MEZO
EN
40
www.eberg.eu
Check up whether the exhaust hose has been mounted properly.
Cautions for cooling and dehumidifying operations:
•
When using functions on cooling and dehumidifying, keep an interval of at least 3 minutes
between each POWER.
•
Power supply meets the requirements.
•
The socket is for AC use.
•
Do not share one socket with other appliances.
•
Power supply is AC220V, 50Hz
2. Drainage mode
1.Condensate automatic evaporation drainage
The machine can automatically evaporate condensed water and discharge it through the exhaust
pipe In the refrigeration and dehumidification mode, the machine does not need to connect the
drainage pipe for drainage, please ensure that the water plug of the machine has been installed.
2.Continuous drainage
Refer to the installation guide below.
3.Water filled with alarm
When the water tank is full, the indicator light will be on, the buzzer will sound 5 times, the
display screen will display „E3”, the compressor will automatically stop running.At this time, the
water plug at the drain under the machine can be removed, and the water can be discharged
through the drain pipe. The machine returned to normal operation.
7. INSTALLATION EXPLANATIONS
1. Installation Explanations
•
A removal air-conditioner shall be installed in the flat and empty place allaround. Don’t
block the air outlet, and the required distance around should be at least 30cm.
•
Should not be installed in dry cleaner.
•
Socket wiring should be in accordance with the local electric safety requirements.
