LOOX
EN
9
www.eberg.eu
2. FAN CONSTRUCTION
3. INSTALLATION AND OPERATION
The above drawings (Fig. 1, 2) show the construction of the fan. The basic elements of the device
construction are:
1. Grille
2. Base
3. Power cord
4. Speed control knob
1. Before connecting the cable to the power supply, make sure that the fan is turned off - the
adjustment knob is in the OFF position (Fig. 3).
2. Place the fan on a dry and flat surface.
3. Connect the power cord to a power socket with a voltage in accordance with the data on
the rating plate of the device (220-240V, 50 Hz).
4. To start the fan, turn the adjustment knob to the desired fan speed: HIGH (III), MEDIUM (II)
or LOW (I) (Fig. 3).
Fig. 1
Fig. 3
Fig. 2
