Eberg GIRO, Инструкция по эксплуатации

Страница: 22 / 26

GIRO
21
4. Add Devices in Easy mode (Recommend)
Make sure your smart device is energized and your mobile phone Is connected to your WiFI network
lf tho WiFi indicator of smart device keeps flashing to indicate that the smart device enters the mode
of configuring the mobile phone; if not please press the Tirner button for more than 5 seconds, after
hearlng the smart devices „beep”, then loose it and thls means the device is already for configuration.
Open your ‚Smart Life” APP and tap ‚”+” on the top right off the APP. Select type of service device, tap „Al
devices” and turn to „ Add Device”, then automatically fetch the password of the WiFi network That your
mobile phone connects to. Then tap „OK” to connect to the device.
When appearing „succesfully added 1 device”, it means the connection is complete and your device will
be listed in your APP list.
5. Add Devices in AP Mode.
If failed in Easy Mode, users could also add devices In AP Mode. Press the Timer/WI-FI button tor more
than 5 seconds until hearirig „beep”and the WiFi indicator light begin to flash quickly. Then press the
Timer button for another 5 seconds until hearing „beep”and the indicator light begin flash slowly, this
means the device is already for configuration in the AP Mode.
Tap „+” on the top right of the APP. Select Device Type and tap it. Then select „AP Mode” on the top right
of the APP. Tap „Connect now” to go to the WLAN Settings interface in your mobile phone and select the
WiFi network named „Smart Life,_XXXX” to connect it.
• Return to the „Smart Life” APP, the connection will SIM automatically.
• When appears ; „Successfully added 1 device, lt means the connection is complete and your device will
be listed in your APP list.
Now you cen control your smart device via your mobile phone APP anytime and anywhere.
(Make sure your mobile phone and smart device on, all connected to the network). You can share your
devices with your friend or family alter you add your devices successfully.
Q&A
Why failed in adding device?
Make sure the device is powered on and close to your mobile phone when adding device.
Make sure your mobile phone is connected to the WiFi network and your WiFi router is
working properlyMake sure the device is ready for configuration. Please refer to the Product lnstruciton
„Add Devices In Easy Mode” or „Add Devices In AP Mode” for details.