7
If»Date« and/or »World Time« are selec-
ted, then they appear alternately with the
LCD display.
•
Every time the minutes are changes, the
real-time clock is compared with the of
the alarm times, if this is activated (refer
also to section: »Alarm Activated«).
➢
When you press the mode button
you
can call up the following settings one
after the other:
setting alarm time 1/
setting alarm time 2/
setting the time/
setting the date/
display time zone
display of the world time/
setting the date reminder 1-10
Automatic mode
■
Setting the time
1.
In automatic mode, press the mode but-
ton
3 times.
The hours and minutes display of the cur-
rent timestarts to flash and the secondary
display counts upwards continuously.
2.
Press the (–)
or (+)
buttons to chan-
ge the time display in minute intervals.
Pressing and holding the buttons chan-
ges the time display in intervals of 10
minutes.
3. To confirm your settings, once more
press the mode button
, and the appli-
ance switches to the setting of the date.
If you do not press any button for 15
seconds then the current settings are
confirmed and the appliance then swit-
ches back automatically into automatic
mode.
■
Setting the date
1.
In clock setting mode, press the mode
button once
(in automatic mode, press
the mode button 4x
). The display of
the date in the LCD display starts to
flash.
2.
Press the (–)
or (+)
buttons to chan-
ge the current setting in daily intervals.
Pressing and holding the buttons chan-
ges the time display in intervals of 10
days. As soon as the correct date is set,
the marking for the day is automatically
updated.
3. To confirm your settings, once more
press the mode button", and the applian-
ce switches to the setting of the respecti-
ve local time.
If you do not press any button for 15
seconds then the current settings are
confirmed and the appliance then swit-
ches back automatically into automatic
mode.
■
Setting the alarm times (Alarm 1 and 2)
1.
In automatic mode, press the
mode
button once to access the settings for
alarm time 1.
If you re-press the
mode button" then
you can now access the settings for
alarm time 2.
The display »AL1« or »AL2« at the right of
the display now stabilises and shows
which alarm feature is set.
2. Press the Alarm ON/OFF
button to
switch on or off the alarm feature.
The bell with the appropriate number in
the display signalises that the alarm is
activated.
3. Press the setting button
(weekday/
weekend) to set the alarm to a weekday
(Mon.- to Fri.) or weekend alarm.
4. Press the (–)
or (+)
buttons to chan-
ge the current setting in minute intervals.
Pressing and holding the buttons chan-
ges the time display in intervals of 10
minutes.
If you do not press any button for 15
seconds then the current settings are
confirmed and the appliance then swit-
ches back automatically into automatic
mode.
IB_KH2292_content_UK.qxd 03.03.2005 14:26 Uhr Seite 7