EN
Ebeco AB provides a 10 year guarantee for defective materials
in Snowmelt, Snowmat, MI-60 and Multiflex 27.
The guarantee only becomes valid under condition that the
installation is carried out by a qualified electrician according to
the applicable regulations and in accordance with installation
instructions issued by Ebeco. This guarantee certificate, includ-
ing the test record below, must be completed in its entirety and,
along with the materials specification or invoice, must be signed
by the electrician who carried out the installation. Furthermore,
there must be photographs/sketches that show the mat in its
entirety after laying but before covering.
If defects should arise during the guarantee period, Ebeco AB
undertakes to repair or alternatively replace Snowmelt/Snow
-
mat/Multiflex at no cost to the purchaser.
Ebeco AB also undertakes to restore the surface coating to its
original condition after the repair or replacement has been
completed. In order to be able to remedy the fault, the purchaser
must have saved or have access to 1 m² of the existing surface
material. For any controls (timer/panelboard), where defects
occur after 3 years, Ebeco AB will supply a new control.
The guarantee does not apply to installations that have been
carried out by an unqualified electrician or alternatively if an
unqualified electrician has carried out modifications or repairs.
Nor does the guarantee apply if the defect has arisen as a result
of using incorrect materials and construction or as a result of
incorrect installation. Nor is damage covered that is a result of
vandalism, fire, lightning, water damage or damage caused by
negligence, abnormal usage or as a result of an accident.
In the event of a material defect that is covered by the guarantee
Ebeco AB must be notified.
In the event of the guarantee being invoked, this guarantee certifi-
cate with accompanying invoice of installation, material specifica-
tion plus completed and signed test record must be presented.
EBECO AB
Martin Larsson, CEO
Electrical installation carried out by:
-------------------------------------------------------------
according to enclosed materials specification.
Date: -----------------------------------------------------
Signature: -----------------------------------------------
Guarantee certificate Snowmelt, Snowmat, MI-60 and Multiflex 27, EN, 1/1, 230709
ebeco.com
Test record Snowmelt, Snowmat MI-60 and Multiflex 27
Min. insulation value 10 Mohm.
Before laying
After fixing
After surface coating / embedding
Mat / Cable no. 1-6
Resistance
value
Insulation
value
Resistance
value
Insulation
value
Resistance
value
Insulation
value
No. 1, E-no.:
No. 2, E-no.:
No. 3, E-no.:
No. 4, E-no.:
No. 5, E-no.:
No. 6, E-no.:
*Applies only under condition that the product is installed together with Snow
-
mat timer, E 18 970 77, or Ebeco’s panelboard.
Guarantee certificate
Snowmelt, Snowmat, MI-60 and Multiflex 27*
