EBCHQ 99315 Скачать руководство пользователя страница 6

Страница: 6 / 9

Parts list

3. Service

Have your Hydraulic Crimping Tool serviced by a qualified service technician using

only identical replacement parts. This will ensure that the safety of the Hydraulic

Crimping Tool Kit is maintained.

SPECIFIC SAFETY RULES

Maintain labels and nameplates on the tool which carry important safety information.

If unreadable or missing, contact the agent to replace.

This product is not a toy, keep it out of reach of children.

Do not slide your fingers in the dies profile.

Do not put your fingers in the head of the hydraulic crimping tool when you slide the

dies inside it. Your fingers could be pinched very severely.

Do not use the tool without die.

Do not crimp on live cables or conductors

Do only crimp cooper or Al conducting material

The warnings, precautions, and instructions discussed in this instruction manual

cannot cover all possible conditions and situations that may occur. It must be

understood by the operator that common sense and caution are factors which cannot

be built into this product, but must be supplied by the operator

SAVE THIS INSTRUCTIONS

Содержание 99315









