EBARA Ego, Руководство по эксплуатации и техническому обслуживанию

Страница: 12 / 60

12
3. IDENTIFICATION DATA
3.1. MANUFACTURER
EBARA Pumps Europe S.p.A.
Factory management:
Via Torri di Confine, 2/1 int. C - 36053 GAMBELLARA (VI) ITALIA
Telephone: Tel. +39 0444 706811 - Fax: +39 0444/405811
Registered office:
Via Campo Sportivo, 30 - 38023 CLES (TN) ITALIA
Telephone: Tel. +39 0463 660411 - Fax: +39 0463/422782
4. WARRANTY AND TECHNICAL ASSISTANCE
Failure to comply with the indications supplied in this instruction book and/or
any intervention on the unit not performed by our assistance centres, will make
the warranty null and void and relieve the manufacturer from any liability in case
of accidents to persons or damage to property and/or the unit itself.
5. GENERAL SAFETY PRECAUTIONS
Before operating the electropump, the user should know how to perform
all operations described in this manual and apply them every time during
the use or maintenance of the electropump.
The user must strictly observe the safety regulations in force in his country;
he must also take into account the electropump features (see "data label").
The user must never carry out operations or interventions, which are not
accepted in this manual, on his own initiative.
This device is not intended for use by persons (including children) with
reduced physical, sensory and mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of this device by a person responsible for their safety.
During the repair or maintenance interventions of the electropump, take off
the power supply, thus preventing the accidental starting that could cause
damage to persons and/or property.
Any maintenance, installation or moving operations performed on the
electropump with the electric system energized, can cause serious accidents
or death to persons.
Do not start the unit when barefoot, or worse, in water and with wet hands.
5.1. INTENDED USE
The circulating pumps Ego (B) -/40, Ego (B) -/60, and Ego (B) -/80 are designed
for forced circulation of the fluid in central heating systems or for sanitary plants
GB