- 21 -
A
B
C
D
E
EBA 485 A
•
Operation
•
EBA 485 A
Start machine
•
Main switch
E
to position "I", insert the key
G
for the control panel and turn it to the right.
Open the front safety guard
A
Only by EBA 485 A
Cutting to specified dimensions
•
The measurement is set with the backgauge
crank.(
A
) The symbol – rotary direction –
moves to the right on the display (
B
) (see
picture
C
). The rotary direction of the
(backgauge crank (
A
) is indicated on the
right. Keep turning the backgauge crank to
the right until a measurement appears
(see picture
E
).
The reference position is reached. The
cutting size can now be set with the
handle (
A
).
If the backgauge is right at the front
the
symbol – rotary direction –
ill move to
the left (see picture
D
). Turn the backgauge
crank to the left until the rotary direction
appears on the right
in the display (see
picture
C
). Afterwards turn the backgauge
crank to the right until a measurements
appears (see picture
E
). The reference
position is reached. The cutting size can now
be set with the handle (
A
). Proceed to
position
from the rear.
The measurement scale in cm or inch has a
LED display
a
. For information on how to
store see page 20, picture below left.
•
Insert paper and move by means of the
stacking angle to the backgauge
H
and side
lay on the left
I
.
•
Close the front safety guard
A.
•
Release the cut.
Cut according to markings
•
Adjust the backgauge with the crank handle
F
to the back.
•
Insert paper and move by means of the
stacking angle to the backgauge
H
and side
lay on the left
I.
•
Turn the crank handle
F
to the right until the
marking on the paper to be cut is below the
cutting line indicator.