6
The UX8800 will now update to the latest OS file you have selected.
Once it is finished updating the front panel will say “Update Complete”.
This process could take up to 10 minutes.
5. Connecting your UX8800 to EAWPilot control software
To connect to EAWPilot use the CAT 5 crossover cable that was provided in the box
with your UX8800.
Connect the crossover ethernet cable into the port on the front of your UX8800 labeled
Ethernet.
Connect the other end to your PC/Laptop ethernet port.
Open EAWPilot and click the online button. The online button will light up and an icon
of your UX8800 will appear in the right column under the found devices tab. When
EAWpilot is establishing connection with your UX8800 you will see a spinning arrow
icon. When connection is established this will turn into a green check mark. If this check
mark is red you will need to go back and verify steps 3 and 4.
Click and drag the UX8800 icon to the design column located to the left of the found
devices tab.
You can now access your UX8800 by double clicking the icon in the design column.
Now that your UX8800 and EAWPilot have established a connection, follow the quick
start manuals located under the download tab on the EAW website to begin programming
your UX8800.
www.eaw.com
If you have any further questions on connection or operation of the UX8800 or EAW Pilot
software call the EAW Application Support Group at 1-800-992-5013
10-08
