EAW UX3600, Руководство пользователя, Страница: 15 / 20

EAWPilot when connected to your UX by pressing the OK button to
select Device from the Utilities submenu.
Using the up and down arrow keys to select a character and the left and
right arrow keys to step between characters give your UX3600 a name.
Press OK to enter your selected name.
Temperature: Temperature is used to calculate air loss pre-emphasis when setting
listener distances in a Greybox. It is also used to calculate delay time
from distance which is in turn dependent on the speed of sound which
varies depending on temperature.
Press Ok to select Temperature from the Utilities submenu.
Use the up and down arrow buttons to set the ambient temperature
between 32 F degrees and 104 F degrees or 0 C degrees to 40 C
degrees, depending on the Units setting.
Humidity: Humidity is used to calculate air loss pre-emphasis when setting listener
distances in a Greybox.
Press Ok to select Humidity form the Utilities submenu.
Use the up and down arrows to enter the relative humidity in steps of 1%.
Press OK to enter.
On Pgrm Load: Select the mute options for when a saved program is recalled and loaded
into active memory.
Press Ok to select from Utilities submenu.
Use the up and down arrows to scroll through No Mutes, All Mutes, or
Current Mutes.
Press the OK button to enter.
LCD Contrast: Adjust the LCD contrast value.
Press Ok to select LCD Contrast from the Utilities submenu.
Use the up and down arrows to scroll through percent by steps of 1%.
Press the OK button to enter.
Unit: Select either U.S. or metric units by pressing the OK button to select Unit
from the Utilities submenu.
Use the up and down arrow buttons between U.S. and metric.
Press the OK button to enter.
Front Panel Lock… To lock the front panel functions, except Mute buttons, from being
operated select Front Panel Lock… from the Utilities submenu by
pressing OK.
Use the up and down arrow keys to enter characters into the pass code
area.
The factory default code is 1234 .
Press OK to enter.
To set a new pass code after selecting Set Pass Code from the Front
Panel Lock… submenu enter the old code, press OK, and then enter your
new code.
Press OK to enter.
About… Select to view information about the processor by pressing Ok from the
Utilities submenu.
Version #: Displays the version of firmware installed in the processor.
Device Id: Displays the unique hardware ID assigned at the factory.
EAWPilot uses the device ID to identify and recognize each
particular device to which it can connect.
Page 11