Acoustic Performance Partnership
Eastern Acoustic Works
UB80
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email [email protected]
AC
O
US
TIC
AL
PER
FORMANCE PA
RTN
ER
SH
IP
SPECIFICATIONS
UB80
DIMENSIONAL DRAWINGS
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
The two-way full range loudspeaker systems shall incorpo-
rate an 8-in LF transducer and a 1.3-in soft dome tweeter HF
transducer.
The LF driver shall be mounted in a vented enclosure tuned
for optimum low frequency response. The HF driver shall be
loaded on an axis-symmetrical wave guide plate with a nomi-
nal coverage pattern of 120
°
(conical). An internal passive
filter network shall provide fourth order acoustical crossover
and system equalization.
System frequency response shall vary no more than
±
3 dB
from 75 Hz to 17 kHz measured on axis. The loudspeaker
shall produce a Sound Pressure Level (SPL) of 92 dB SPL on
axis at 1 meter with a power input of 1 Watt, and shall be
capable of producing a peak output of 120.6 SPL on axis at
1 meter. The loudspeaker shall handle 180 Watts of amplifier
power (AES Standard) and shall have a nominal impedance
of 8 Ohms.
The loudspeaker enclosure shall be irregularly pentagonal in
shape. It shall be constructed of 1/2-in thickness void-free
cross-grain-laminated Baltic birch plywood and shall employ
extensive internal bracing. It shall be finished in black cata-
lyzed polyurethane. Input connectors shall be 2-terminal
barrier strip and dual Neutrik NL4 Speakon. A total of two 3/
8"-16 Threaded Mounting Points (1 each per side) and four
1/4”-20 Threaded Mounting Points (on rear to accept
Omnimount Series 75) shall be provided. The front of the
loudspeaker shall be covered with a vinyl coated perforated
steel grille.
The two-way full range loudspeaker shall be the EAW model
UB80.
6.15
5.25
4.25
9.88
VIEW A-A
BACK
7.17
9.62
9.88
TOP
20
°
45
°
19.75
3.5
.97
8.88
2
.97
4.62
6.06
5.44
11.75
FRONT
SIDES
UB80
510280 EXP 4/1/97 SHB
3/8-16 MOUNTING POINT
1/4-20 MOUNTING POINT FOR ONMIMOUNT SERIES 75
ALL DIMENSIONS IN INCHES UNLESS OTHERWISE SPECIFIED.
CENTER OF GRAVITY.
