SPECIFICATIONS MQV2394e
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
[email protected] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
MQV2394e/0002693/002/2 pp October 2003
Printed in USA
Manufacturing tolerances are +/-0.13 and +/-1°
A
27.50
SIDES
L
C
22.81
(25.36)
L
C
L
0002331(A) 9/11/02
12.50
BACK
25.59
2X ACCESS PANEL
INPUT
GRILLE PARTIALLY SHOWN
FRONT
VIEW A-A
56.25
DIMENSIONS
APPLY
TO TOP AND
BOTTOM
C
52.35
DIMENSIONS
APPLY
TO BOTH SIDES
NOTES:
1. SYMBOL INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (PI ANGLE).
2. SYMBOL INDICATES CENTER OF
BALANCE.
3. WEIGHT APPROX. 300 LBS.
4. SHIPPING WEIGHT APPROX. 330 LBS.
8.08
15.71
29.61
10.92
4.00
5.00
36.71
15.34
7.50
A
25°
(1.95)
The 3-way full-range loudspeaker shall incorporate two 15-in
slot-loaded woofers, two 10-in MF cones with Radial Phase
Plug™, and a 2-in exit/3-in diaphragm HF compression driv-
er. The MF and HF devices shall be loaded on horns that pro-
vide a nominal 90° x 40° beamwidth. An internal passive
crossover network shall offer either bi- or tri-amplified oper-
ation, configurable via jumpers on the input panel.
System frequency response shall vary no more than 63 dB
from 70 Hz to 15 kHz measured on axis. The LF section shall
produce a sound pressure level of 97 dB SPL on axis at 1 meter
with a power input of 1 watt, and shall be capable of pro-
ducing a peak output of 134 dB SPL on axis at 1 meter. The
LF section shall handle 1200 watts of amplifier power (AES
Standard) and shall have a nominal impedance of 4 ohms.
When operated in bi-amplified mode, the MF/HF section shall
produce a sound pressure level of 107 dB SPL on axis at 1
meter with a power input of 1 watt, and shall be capable of
producing a peak output of 142 dB SPL on axis at 1 meter. The
MF/HF section shall handle 800 watts of amplifier power (AES
Standard) and shall have a nominal impedance of 4 ohms.
When operated in tri-amplified mode, the MF section shall
produce a sound pressure level of 110 dB SPL on axis at 1
meter with a power input of 1 watt, and shall be capable of
producing a peak output of 145 dB SPL on axis at 1 meter. The
MF section shall handle 800 watts of amplifier power (AES
Standard) and shall have a nominal impedance of 4 ohms.
The HF section shall produce a sound pressure level of 106 dB
SPL on axis at 1 meter with a power input of 1 watt, and shall
be capable of producing a peak output of 134 dB SPL on axis
at 1 meter. The HF section shall handle 150 watts of amplifi-
er power (AES Standard) and shall have a nominal impedance
of 8 ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of exterior grade Baltic birch plywood
and shall employ extensive internal bracing. It shall be fin-
ished in wear-resistant textured black paint. Input connectors
shall be a terminal strip. A total of 16x 3/8”-16 threaded
mounting/suspension points (4 each top, bottom, and sides)
shall be provided. The front of the loudspeaker shall be cov-
ered with a powder coated perforated steel grille.
The 3-way full-range loudspeaker shall be the EAW model
MQV2394e.
