Acoustic Performance Partnership
Eastern Acoustic Works
MQH1346e
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email [email protected]
AC
O
US
TIC
AL
PER
FORMANCE PA
RTN
ER
SH
IP
SPECIFICATIONS
MQH1346e
ARCHITECTURAL SPECIFICATIONS
The 3-way full-range loudspeaker shall incorporate 2x 15-in
slot-loaded woofers, a 10-in MF cone with Radial Phase Plug™,
and a 2-in exit/3-in diaphragm HF compression driver. The
MF and HF devices shall be loaded on asymmetrical, down-
angled horns with a 40
°
x 60
°
beamwidth. The LF woofers
shall be optimally spaced to provide significant off-axis at-
tenuation to below 200 Hz.
System frequency response shall vary no more than 63 dB
from 75 Hz to 15 kHz measured on axis. The lower LF section
shall produce a sound pressure level of 92 dB SPL on axis at
1 meter with a power input of 1 watt, and shall be capable
of producing a peak output of 126 dB SPL on axis at 1 meter.
The upper LF section shall produce a sound pressure level of
94 dB SPL on axis at 1 meter with a power input of 1 watt,
and shall be capable of producing a peak output of 128 dB
SPL on axis at 1 meter. The MF section shall produce a sound
pressure level of 110 dB SPL on axis at 1 meter with a power
input of 1 watt, and shall be capable of producing a peak
output of 142 dB SPL on axis at 1 meter. The HF section
shall produce a sound pressure level of 109 dB SPL on axis at
1 meter with a power input of 1 watt, and shall be capable
of producing a peak output of 137 dB SPL on axis at 1 meter.
Both LF sections shall handle 600 watts of amplifier power
(AES Standard) and shall have a nominal impedance of 8
ohms. The MF section shall handle 400 watts of amplifier
power (AES Standard) and shall have a nominal impedance
of 8 ohms. The HF section shall handle 150 watts of ampli-
fier power (AES Standard) and shall have a nominal imped-
ance of 8 ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of exterior grade Baltic birch plywood
and shall employ extensive internal bracing. It shall be fin-
ished in wear-resistant textured black paint. Input connec-
tors shall be a terminal strip. A total of 16x 3/8”-16 threaded
mounting/suspension points (4 each top, bottom, and sides)
shall be provided. The front of the loudspeaker shall be cov-
ered with a powder coated perforated steel grille.
The 3-way full-range loudspeaker shall be the EAW model
MQH1346e.
DIMENSIONAL DRAWING
PHYSICAL
LF Subsystem
2x 15-in cones, vented
MF Subsystem
10-in horn loaded cone, Radial
Phase Plug™
HF Subsystem
1x 2-in exit/3-in diaphragm voice
coil compression driver on a
constant directivity horn
Configuration
3-way, full-range
Powering
Quad-amplified
Enclosure Material
Exterior grade Baltic birch plywood
Finish
Wear-resistant textured black paint
Connectors
Terminal barrier strip
Suspension Hardware
16x 3/8”-16 threaded mounting
points (4 each on top, bottom and
sides)
Grille
Powder coated perforated steel
Dimensions
Inches
Millimeters
Height (front)
54.0
1372
Width (Front)
27.0
711
Width (Rear)
8.4
213
Depth
27.0
686
Trapezoid Angle
20 degrees per side
Weights
Pounds Kilograms
Net Weight
224
101.8
Shipping Weight
252
114.5
A
L
5.00
C
4.93
C
L
C
L
C
L
A
TOP
21.17
4.00
28.00
BACK
DIMENSIONS APPLY
TO BOTH SIDES
VIEW A-A
FRONT
L
C
MQH1346e
BOTTOM
11.75
29.94
10.25
15.00
NOTES:
1. SYMBOL INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (PI ANGLE).
2. SYMBOL INDICATES NON LOAD BEARING
MOUNTING POINT, 3/8-16 THREADED HOLE
(PI ANGLE).
3. SYMBOL INDICATES CENTER OF BALANCE.
4. WEIGHT APPROX. 224 LBS.
5. SHIPPING WEIGHT APPROX. 252 LBS.
27.00
DIMENSIONS APPLY
TO TOP AND BOTTOM
4.00
(2.53)
15.96
(8.35)
40°
ACCESS PANEL
ACCESS PANEL
25.16
(1.95)
ACCESS PANEL
50.10
GRILLE PARTIALLY SHOWN
54.00
48.94
26.75
INPUT
Manufacturing tolerances are +/-0.13 ans +/-1
°
