background image

Frequency Response (1 W @ 1m)

±3 dB

250 Hz to 12 kHz

-10 dB

200 Hz

Axial Sensitivity (dB SPL, 1 Watt @ 1m)

Passive

107

MF

109

HF

107

Impedance (Ohms)

Passive

8

MF

8

HF

8

Power Handling, AES Standard (Watts)

Passive

325

MF

400

HF

150

Calculated Maximum Output (dB SPL)

Passive Peak 138

MF Peak 141

HF Peak 135

Passive Long Term 132

MF Long Term 135

HF Long Term 129

Nominal Coverage Angle/-6 dB points (degrees)

Horizontal 60

Vertical 60

Recommended High-Pass Frequency 

24 dB/Octave 200 Hz

SPECIFICATIONS MQ1366e

FEATURES

DESCRIPTION

PERFORMANCE

One Main Street, Whitinsville, MA 01588

508 234 6158

Toll Free 800 992 5013

FAX 508 234 8251

[email protected]

www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice.

MQ1366e/0002679/2 pp April 2002

Printed in USA

APPLICATION

PHYSICAL

Configuration Mid/High

Powering Passive or Bi-amplified

MF Subsystem 1x 10-in horn-loaded cone, 

Radial Phase Plug™

HF Subsystem 1x 2-in exit/3-in voice voil com-

pression driver on constant 
directivity horn

Enclosure Materials Exterior grade Baltic birch plywood

Finish Wear resistant textured black paint

Connectors Terminal barrier strip

Suspension Hardware 16x 3/8"-16 threaded mounting 

suspension points (4 each top, 
bottom and sides)

Grille Powder coated perforated steel

Dimensions

inches

millimeters

Height 40.00

1016

Width (front) 32.00

813

Width (rear) 8.12

206

Depth 25.61

650

Trapezoid Angle 25° per side

Weights

pounds

kilograms

Net Weight 148

67.3

Shipping Weight 156

71.0

• Dedicated horn loaded MF/HF array module
• 10-in MF w/ Radial Phase Plug™; 2-in exit 

Neodymium HF

• 60° x 60° beamwidth
• Vertically configured to create horizontal arrays

A dedicated mid/high system in a vented trapezoidal enclo-
sure.  Includes a horn-loaded 10-in MF cone with Radial Phase
Plug™ and a 2-in exit/3-in diaphragm Neodymium compres-
sion driver.  The MF and HF horns provide a nominal 60° x 60°
beamwidth. An internal passive crossover with jumpers on the
input panel allows user selection of either bi-amplified or
passive operation.  In either case digital signal processing is
required to achieve specified performance.   The enclosure
features a comprehensive system of 3/8”-16 threaded sus-
pension points.

The MQ1366e employs a no-compromise design where the mid
and high frequency horns are truly large enough to provide
optimal pattern control throughout each passband.  The horns
feature a rigid but well-damped construction using wood
veneer backed by structural foam.  The MQ1366e has been
designed to work with a complementary MQ1300 Series LF
loudspeaker to create a full-range audio system, but may also
be used without a LF complement for voice-only applications.
The enclosure is vertically configured for arraying in horizon-
tal rows.  Horizontal arrays are typically used in venues, such
as houses of worship, where the array must address wide, fan-
shaped audiences.

Application Usage:

Install

Houses of Worship

Auditoriums

Theatres

Arenas

Performing Arts Centers 

Stadiums

Отзывы: