EAW MKD Series, Инструкция по эксплуатации

Страница: 8 / 12

MKD1200 Series U-Bracket Mounting and Angle Lock Points
Not Available with the WP Version
v. Test fit an MKD Series U-Bracket on an MKD Series Loudspeaker to confirm the
correct angle, loudspeaker and u-bracket orientation before installing the U-
bracket to the mounting surface.
b. Removing existing hardware
i. MKD Series U-Brackets are mounted to MKD Series Loudspeakers using a button
head screw located at the center of the top and bottom of each loudspeaker.
ii. Using a 6mm Allen wrench, remove the flat head screws located at the center of
the top and bottom of the MKD Series Loudspeaker.
iii. If choosing to use the MKD Series U-Bracket angle lock points, locate the flat head
screw in the loudspeaker that corresponds with the intended install angle. Using
Mounting
Point
Angle
Lock
Point
MKD800 U-Bracket MKD1000 U-Bracket MKD1200 U-Bracket
“A” 1 0° 0° 0°
2 +/-12° +/-8° +/-6°
3 +/-25°, +/-55°, +/-75°, +/-105° +/-12°
4 +/-40°, +/-90° +/-40°, +/-90°
5 +/-32.5°, +/-47.5°, +/-82.5°, +/-97.5°
6 +/-25°, +/-55°, +/-75°, +/-105°
“B” 1 +/-35° +/-40° +/-40°, +/-90°
2 +/-12.5°, +/-57.5° +/-55°, +/-75°, +/-105° +/-49°, +/-81°, +/-99°
3 0° +/-22°, +/-58°, +/-72°, +/-108°
7 0°
8 +/-13.5°
“C” 3 +/-75°
8 +/-70°