SPECIFICATIONS MK8126
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
MK8126/0004843/001/2 pp September 2002
Printed in USA
The two-way full range loudspeaker systems shall incorporate
an 8-in LF transducers and a 1-in exit/1.5-in voice coil com-
pression driver HF transducer.
The LF drivers shall be mounted in an optimally vented enclo-
sure tuned for maximum low frequency response. The HF driv-
er shall be loaded on a constant directivity horn with a nom-
inal coverage pattern of 120° (h) x 60° (v). The HF horn shall
feature a square flange allowing it to be rotated 90°. An
internal passive filter network shall provide fourth order
acoustical crossover and system equalization between the low
and high frequency sections.
System frequency response shall vary no more than ±3 dB
from 89 Hz to 18 kHz measured on axis. The system shall pro-
duce a Sound Pressure Level (SPL) of 95 dB SPL on axis at 1
meter with a power input of 1 Watt, and shall be capable of
producing a peak output of 125.8 dB SPL on axis at 1 meter.
The system shall handle 300 Watts of amplifier power (AES
Standard) and shall have a nominal impedance of 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of exterior grade Baltic birch plywood
and shall employ extensive internal bracing. It shall be fin-
ished in wear resistant textured black paint. Input connectors
shall be two-terminal barrier strip. A total of 13x 3/8"-16
threaded mounting/suspension points (3 each top and bot-
tom, 3 per side and 1 back) shall be provided. Four addition-
al mounting points shall be provided on the rear configured
to accept an Omnimount brand Series 100 bracket. The front
of the loudspeaker shall be covered with a powder coated per-
forated steel grille.
The 2-way full range loudspeaker shall be the EAW model
MK8126.
7.25
5.00
C
INPUT
9.09
10.21
.97
5.25
L
509180 (1) 9/17/02
BACK
NOTES
1. SYMBOL INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (PI ANGLE).
2. SYMBOL INDICATES MOUNTING POINT,
5/16-18 THREADED HOLE (OMNI MOUNT).
3. SYMBOL INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (RIVNUT).
19.75
(1.95)
2.90
PARTIALLY
SHOWN
GRILLE
11.75
5.90
11.03
15.85
(6.00)
C
4.08
L
8.07
FRONT
2.75
DIMENSIONS APPLY TO
TOP AND BOTTOM
BOTTOM
45°
2.90
DIMENSIONS APPLY
TO BOTH SIDES
RIGHT SIDE
10.09
Manufacturing tolerances are +/- 0.13 and +/- 1°
