SPECIFICATIONS MK5166e
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
MK5166e/0002732/2 pp
April 2002
Printed in USA
The 2-way full-range loudspeaker shall incorporate a 15-in LF
transducer and a 1.4-in exit/1.75-in diaphragm HF compres-
sion driver.
The LF transducer shall be mounted in a vented enclosure
tuned for optimum low frequency response. The HF driver shall
be loaded on a constant directivity horn with a nominal
beamwidth of 60° (h) x 60° (v). An internal passive filter net-
work shall provide acoustical crossover and system equaliza-
tion.
System frequency response shall vary no more than ±3 dB
from 50 Hz to 18 kHz measured on axis. The loudspeaker shall
produce a sound pressure level (SPL) of 97 dB SPL on axis at
1 meter with a power input of 1 watt, and shall be capable of
producing a peak output of 130 dB SPL on axis at 1 meter. It
shall handle 500 watts of amplifier power (AES Standard) and
shall have a nominal impedance of 8 ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of exterior grade Baltic birch plywood
and employ extensive internal bracing. It shall be finished in
wear-resistant textured black paint. Input connectors shall be
a 2-terminal barrier strip. A total of twelve 3/8”-16 thread-
ed mounting points shall be provided. Four addtional mount-
ing points for use with an Omnimount Series 300 or similar
bracket shall also be provided. The front of the loudspeaker
shall be covered with a powder coated perforated steel grille.
The 2-way full-range loudspeaker shall be the EAW model
MK5166e.
A
CL
A
8.32
TOP
2X 15°
C
L
7.25
CL
6.09
18.71
VIEW A-A
FRONT
12.00
15.63
6.87
3.44
9.43
BACK
(1.97)
26.06
(8.88)
6.80
8.45
19.73
GRILLE PARTIALLY SHOWN
30.00
INPUT
3.70
5.25
(1.95)
26.10
DIMENSIONS APPLY
TO BOTH SIDES
C
L
NOTES:
1. SYMBOL INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (NUT PLATE)
2. SYMBOL INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE ( PI ANGLE)
3. SYMBOL INDICATES MOUNTING POINT
5/16-18 T-NUT FOR OMNIMOUNT SERIES 300.
4. SYMBOL INDICATES CENTER OF BALANCE.
5. WEIGHT APPROX. 78 LBS.
6. SHIPPING WEIGHT APPROX. 89 LBS.
DIMENSIONS APPLY
TO TOP AND BOTTOM
30°
MK5166e
Manufacturing tolerances are +/- 0.13 and +/- 1°
