Acoustic Performance Partnership
Eastern Acoustic Works
KF650e
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email [email protected]
AC
OU
ST
ICA
L P
ERFOR
MANCE P
ART
NE
RSH
IP
TECHNICAL SPECIFICATIONS
KF650e
DIMENSIONAL DRAWINGS
DIMENSIONAL DRAWING
ARCHITECTURAL SPECIFICATIONS
The three-way full range loudspeaker systems shall incorpo-
rate a 15-in LF transducer, a 10-in cone MF transducer and a
2-in exit compression driver HF transducer.
The LF driver shall be mounted in a wave guide cavity for
optimum low frequency directivity. The MF driver shall be
loaded into a midrange horn constructed of 3mm birch ply-
wood reinforced with high density polyurethane foam. The
MF horn shall incorporate a phase/displacement plug. The
HF driver shall be mounted coaxially within the woofer cav-
ity and shall be loaded on a constant directivity horn with a
nominal coverage pattern of 60
°
(h) x 40
°
(v). A device to
absorb refracted HF energy shall be installed behind the HF
section. An internal passive filter network shall provide fourth
order acoustical crossover between the mid and high fre-
quency sections in biamped mode and system equalization.
System frequency response shall vary no more than
±
3 dB
from 65 Hz to 17 kHz measured on axis. In biamped mode,
the mid/high section shall produce a Sound Pressure Level
(SPL) of 107 dB SPL on axis at 1 meter with a power input of
1 Watt, and shall be capable of producing a peak output of
139 SPL on axis at 1 meter. It shall handle 400 Watts of
amplifier power (AES Standard) and shall have a nominal
impedance of 8 Ohms. The LF section shall produce a Sound
Pressure Level (SPL) of 100 dB SPL on axis at 1 meter with a
power input of 1 Watt, and shall be capable of producing a
peak output of 136 SPL on axis at 1 meter. It shall handle
1000 Watts of amplifier power (AES Standard) and shall have
a nominal impedance of 8 Ohms.
In triamped mode, the low frequency and high frequency
sections shall meet all biamped mode performance criteria.
In addition, the midrange frequency section in triamped mode
shall produce a Sound Pressure Level (SPL) of 107 dB SPL on
axis at 1 meter with a power input of 1 Watt, and shall be
capable of producing a peak output of 139 SPL on axis at 1
meter. It shall handle 400 Watts of amplifier power (AES
Standard) and shall have a nominal impedance of 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of 15mm thickness void-free cross-grain-
laminated Baltic birch plywood and shall employ extensive
internal bracing. It shall be finished in black catalyzed poly-
urethane. Input connectors shall be one each male and fe-
male AP4 plus one each male and female AP6. The system
shall include a switch allowing it to be operated in biamp or
triamp powering mode. A total of six 3-position flytracks
with integral 3/8"-16 threaded mounting point (3 each top
and bottom) shall be provided. The front of the loudspeaker
shall be covered with a vinyl coated perforated steel grill
backed with open cell foam to protect against dust.
The three-way full range loudspeaker shall be the EAW model
KF650e.
8.00
5.00
14.18
10.63
6.38
19.75
12.25
TOP
RIGHT SIDE
33.25
ACOUSTIC
REFRACTION
CONTROL ™
DEVICE
8.63
16
VIEW A-A
BOTTOM
FRONT
19.75
2.75
19.75
5.38
4.50
3 POSITION FLY TRACK MOUNTING POINTS.
CENTER OF GRAVITY.
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED.
FLY TRACK
PATTERN SAME
AS TOP
A
A
BACK
14.15
REF
20
°
8.19
6.38
2.75
KF650e
510338
exp 10/22/96 shb
SERVICE ITEMS
LF: Complete Cone Driver
EAW Part No.
804036
MF: Complete Cone Driver
EAW Part No.
804022
HF: Complete Compression Driver/Tweeter
EAW Part No.
803010
Filter/Crossover Network: Complete Assembly
EAW Part No.
202238
