EAW DX1208, Инструкция по эксплуатации

Страница: 19 / 20

DX1208 –
19
AUTOMIX
ON/OFF
ENABLE
INPUT 1
ANALOG
OUTPUT
ODX
OUTPUT
OUTPUTS A-H
MATRIX MIXING BLOCK
IDX 1
IDX 2
IDX 3
IDX 4
IDX 5
IDX 6
IDX 7
IDX 8
IDX 9
IDX 10
IDX 11
IDX 12
IDX 13
IDX 14
IDX 15
IDX 16
INPUT 2
INPUT 3
INPUT 4
INPUT 5
INPUT 6
INPUT 7
INPUT 8
INPUT 9
INPUT 10
INPUT 11
INPUT 12
FADER
–99 to
+20 dB
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
+
AUTOMIX
INPUT METER
INPUT 1
ODX 1-16
MATRIX MIXING BLOCK
IDX 1
IDX 2
IDX 3
IDX 4
IDX 5
IDX 6
IDX 7
IDX 8
IDX 9
IDX 10
IDX 11
IDX 12
IDX 13
IDX 14
IDX 15
IDX 16
INPUT 2
INPUT 3
INPUT 4
INPUT 5
INPUT 6
INPUT 7
INPUT 8
INPUT 9
INPUT 10
INPUT 11
INPUT 12
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
SAME AS ABOVE
+
AUTOMIX
ENABLE AND
LOGIC
CONTROL
ENABLE FADER
–99 to
+20 dB
MIX MASTER
OUTPUT METER
ENABLE FADER
–99 to
+20 dB
MIX MASTER
OUTPUT METER
ENABLE FADER
–99 to
+20 dB
AUTOMIX
INPUT METER
7. SERVICE INFORMATION
In the event that your DX1208 should require servicing,
please follow these instructions:
1. Call EAW Commercial Tech Support at 1-800-992-5013, 7
am to 5 pm PST (Monday-Friday) to verify the problem and
obtain a Return Authorization (RA) Number. Be sure to have
the serial number of the unit when you call. You must have
a Return Authorization Number in order to obtain warranty
service at an authorized service center. You can also
contact EAW Commercial via email at service@eaw.com ,
or through our website at: www.eaw.com/ContactUs
2. Pack the unit in its original packaging. This is very
important
.
LOUD Technologies is not responsible for
any damage that occurs during shipping due to non-
conventional packaging. Original packaging helps to
minimize the possibility of shipping damage.
3. Include a legible note stating your name, return shipping
address (no P.O. boxes), daytime phone number, and Return
Authorization Number. Give us a detailed description of the
problem, including how we can duplicate it.
4. Write the Return Authorization Number in BIG BOLD
PRINT on the top of the box.
5. Tech Support will tell you where to ship the unit when you
call for an RA Number. We suggest insurance for all forms
of cartage.