6
– CLA37
CLA37–
7
4. Mounting the Enclosure/Fly Bracket Assembly to the Wall Bracket:
The fly bracket is used to secure
the enclosure to the wall bracket.
The enclosure may be tilted
forward at various angles or
mounted vertically. For a forward
tilt, refer to the figure to the right
and these instructions:
a. Insert a 4.25 in screw with a
flat washer, through the middle
hole in the flange of the wall
bracket, through the channel
in the connecting bracket, and
through the second center
hole in the opposite flange
of the wall bracket. Onto the
threaded end of the screw,
place a flat washer and a lock nut. Do not tighten
just yet.
b. Insert a 4.25 in screw with a flat washer, through
the bottom hole in the flange of the wall bracket,
through the horizontal channel in the fly bracket,
and through the second bottom hole in the opposite
flange of the wall bracket. Onto the threaded end of
the screw place a flat washer and a lock nut. Do not
tighten just yet.
c. Secure the other end of the connecting bracket
to the desired holes in the enclosure/fly bracket
assembly, using the 4.25 in screw/washer held in
place with the flat washer and lock nut. Refer to
the figure to the right to achieve the desired angle.
Tighten all three lock nuts.
5. Vertical Mounting:
To mount the loudspeaker enclosure/fly bracket assembly vertically,
discard the connecting bracket, and follow these instructions:
1. Align the top hole in the wall bracket flange with the top rear holes in
the enclosure/fly bracket assembly, and insert a 4.25 in screw with a
flat washer.
2. Onto the threaded end of the screw, place a flat washer and a lock
nut. Do not tighten just yet.
3. Repeat step 4b above, to insert a screw into the wall bracket’s lowest
hole.
4. Tighten both lock nuts.
Step 4b.
Step 4a.
Step 4c.
SCREW 1/4 INCH-20
X 4.25 INCH LONG
HEX HEAD
3 PLACES
FLAT WASHER
1/4 INCH
6 PLACES
LOCK NUT
1/4 INCH-20
3 PLACES
ENCLOSURE AND
FLY BRACKET
CONNECTING
BRACKET
WALL
BRACKET
13
°
10
°
16
°
18
°
22
°
25
°
4
°
7
°
25
°
CONNECTING
BRACKET
TILTING THE
ENCLOSURE
MOUNTING THE
ENCLOSURE VERTICALLY
