CIS961 and CIS991 –
5
4. REAR PANEL FEATURES
5. EYEBOLTS
Four included eyebolts must be securely fitted to the metal
back can for the purpose of suspending the loudspeaker. All
four eyebolts must be used.
An optional mounting kit (AC-CK) is available that consists
of four 10-meter lengths of cable and suitable connectors.
6. INPUT CONNECTORS
The input connections to the loudspeaker are accessed by
moving two metal covers.
Phoenix (Euroblock)
connector.
This four-pin input accepts
a push-in connector for easy
installation. Two terminals
allow connection to the output
of the power amplifier, and two
through-terminals are supplied to
allow passing the power output
to other loudspeakers.
Terminal strip.
This four-terminal connector
allows easy connection of the
audio lines by screw terminals.
(This is also suitable for
those installations requiring
compliance with BS5839,
part 8.) Two terminals allow
connection to the output of
the power amplifier, and two
through-terminals are supplied
to allow passing the power output to other loudspeakers.
Secure the connections with screws.
7. STRAIN RELIEF
This sliding screw clamp allows the wiring to and from the
loudspeaker to be secured. The clamp can also be removed,
and standard conduit fittings (not supplied) connected.
IN
+
IN
–
LOOP
THRU
–
LOOP
THRU
+
5
6
7
